Geeks in Phoenix

Geek Blog


The ultimate guide for building your custom computer

Nothing is more fun for me than planning, purchasing, and assembling all of the components for a custom-built system. I guess that's why I like repairing computers. But most people do not know where to start when it comes to putting together a custom-built computer. So here is the ultimate guide for building your own custom computer.

The ultimate guide for building your custom computer

I have been building and repairing computers since the late '90s and have assembled hundreds of systems. What got me started building custom computers was the fact that I could not upgrade the graphic processor inside the Packard-Bell system I had.

Long story short, I contacted the manufacturer of the graphics processor installed on the motherboard and was told that Packard-Bell had ordered the graphic chip with one of the pins disabled. That way, I would have to go back to Packard-Bell to get an upgraded chip.

I decided to build a computer instead and have been running custom-built computers ever since. In fact, I just recently recycled one of my very first AT cases (it had six (6) 5.25" bays and was over three (3) feet tall). So, without further ado, let's start planning, purchasing, and assembling your custom-built computer.

Note: All links included in this article will open in a separate window.

Planning your computer

If you need to become more familiar with the technical jargon surrounding computer components, this is where you want to start. Understanding the jargon used with computer components is essential to the success of your custom computer build. Let's take a look at the vocabulary surrounding building a custom computer.

Defining confusing computer hardware verbiage

It's an age-old problem: Form vs. function. Do you want a sleek-looking computer that takes up a small amount of space or one that can handle multiple graphic cards and run games with intensive graphics? Let's take a look at some of the things you might want to consider when planning out our custom-built computer,

Things to keep in mind when building a custom-built computer

Sometimes, the simplest things can become problems. For example, using plastic-coated wire twist ties instead of plastic zip ties for cable management or installing case fans with the incorrect air flow direction. These common mistakes can cause problems down the road. Let's take care of them right here and now.

Common problems to avoid when building your own computer

Your computer case is a reflection of you and your style. You can get one with a ton of glass and lights or one that is basic with no bells and whistles. It's entirely up to you. Let's look at some of your options when selecting a computer case.

Tips for choosing the perfect case for your computer

The motherboard is likely the most important component you will choose. With so many options, like the different types of I/O connectors and the number and type of PCIe expansion slots, choosing a motherboard can be daunting. So, let's take a closer look at finding the right motherboard.

Tips for choosing the right motherboard for your custom-built computer

When someone is planning on building a computer for gaming, this is usually the first component they look at. Whether you plan on surfing the web and watching cat videos or are planning a multi-monitor gaming rig, the graphics card you choose is important. So, let's take a deeper dive into graphics cards.

Tips for choosing the right graphics card for your custom-built computer

Keeping your CPU cool is a major priority, as is selecting the right CPU cooler. Should you go with an air-cooled heatsink or a liquid pump and radiator type? Are you planning on overclocking your CPU? Let's examine the options for choosing a CPU cooler.

Tips for choosing the right CPU cooler for your custom-built computer

By now, you should have a good idea of what components you will use to build your computer, so it is time to decide on a power supply. With your choice of case, motherboard, and graphic card(s), you should be able to determine the best power supply for your computer. Let's look at how to determine how much power your computer will require.

How to estimate the power required for your custom-built computer

Purchasing the components

You should now have a list of parts you want to use to build your computer. The trick is to make sure that all of them are compatible. Since you will probably be ordering most, if not all, of the components online, why not check their compatibility online, too? Let's look at some online resources for selecting and purchasing computer components.

How to find compatible computer parts online

Assembling your computer

At this point, you should have all the parts needed to assemble your computer. The following article describes how I typically build a computer. It is long but has plenty of images to guide you through your computer build.

How to build a computer

Things to consider when replacing or upgrading computer components

Updated May 14, 2024

When doing computer repair for a living, there is one thing I do pretty often: replacing and upgrading computer components. Whether it be replacing a drive or installing a new graphics card, there is always something you need to consider. So here are a few things you should ask yourself when selecting computer components.

Things to consider when replacing or upgrading computer components

Things to consider when replacing or upgrading your motherboard

Form factor

  • What form factor size does your existing case support?
    If the motherboard you are looking at getting is ATX and your present case only has space and stand-offs for a mini-ATX motherboard, you will not be able to install the new motherboard.
  • Do you have any of the extra parts that came with the case, including stand-offs for the motherboard?
    If you are replacing a mini-ATX motherboard with an ATX motherboard and your case is large enough for it, do you have the stand-offs and screws for the extra mounting points that the new ATX motherboard will require?
  • Do you have the installation media for the operating system and all your programs?
    When you change out a motherboard, unless it is from the same manufacturer and same model line, odds are you will need to perform a clean installation of the operating system and your apps. If you try to use the existing operating system currently installed with a new motherboard, you are more than likely to get all sorts of errors. Be prepared to reinstall the OS and apps.

CPU socket

  • What is the socket type of your existing CPU?
    You cannot use an LGA1150 processor in an LGA1151 socket.
  • Will the new motherboard you're thinking about getting support your existing processor?
    You will need to do your research on the motherboard you are thinking about getting. If you cannot find the information online, give the manufacturer a call. There is nothing worse than getting a motherboard that you cannot use.

Memory slot(s)

  • Does the motherboard you're considering getting support your existing memory modules?
    Again, do your research. You have to make sure that everything will go smoothly when you do the upgrade.
  • Or are you going to need to get new memory modules?
    If you find out that you will need new memory modules, buy them in pairs (twin-pack, quad-pack). Try to avoid mixing different memory modules if you can. You will also find buying them in twin or quad-packs cheaper than single modules.

Expansion slots (PCI-e)

  • What do you currently have for expansion cards?
    These include graphic card(s), RAID controller card(s), M.2 adapter card(s), Wi-Fi/ethernet card(s), etc..
  • And what type of expansion slot(s) do they use (PCI-e x16, PCI-e x4, PCI-e x1)?
    Make a note about all of the different PCI-e slots that are used on your existing motherboard, and reference it when you are looking at a new motherboard.

M.2 Slot(s)

  • If your existing mother has M.2 slot(s) and you use them, what form factor, key notches, and interface do they utilize?
    M.2 2242, M.2 2260, M.2 2280? B key, M key, or both? SATA 3, PCI-e 3, or NVMe?

Internal USB connections

  • What type of USB headers does your current motherboard have?
    USB 2.0, USB 3.0, USB 3.1 Gen 1 or USB 3.1 Gen 2.

Internal drive connectors

  • What type of internal drive connectors does your current motherboard have?
    SATA, SATA Express or U.2?

Power connector

  • What type of power connector(s) and how many does the motherboard you are thinking about getting have (4-pin or 8-pin ATX 12V)?
    Does your existing power supply have the correct amount of connector(s)?

Related articles
Tips for choosing the right motherboard for your custom-built computer

Things to consider when replacing or upgrading your processor / CPU

Socket type

  • What socket type does your current motherboard have (LGA 1151, LGA 2011, AMD AM5, etc.)?
    Remember that you cannot use an LGA1150 processor in an LGA1151 socket.

Motherboard compatibility

  • What processors does your current motherboard support?
    You will need to do your research on your existing motherboard. If you cannot find the information online, give the manufacturer a call. You may need to update the BIOS on your current motherboard to run the new processor you are considering getting.

Things to consider when replacing or upgrading your CPU cooler

The space inside of case

  • Does your present case have room for an upgraded CPU cooler?
    If you are thinking of air cooling, do you have enough space on top of the CPU for it? If you're thinking about liquid cooling, do you have the correct mounting holes for it? And will you need to replace any of the existing case fan(s) to accommodate a new CPU cooler?
  • Does your motherboard have all the connectors for running a liquid CPU cooler?
    Some liquid coolers require an onboard USB header to function correctly. Also, does your motherboard have any special liquid cooler fan headers?

Related articles
Tips for choosing the right CPU cooler for your custom-built computer

Things to consider when replacing or upgrading your graphics card / GPU

Slot version

  • What version of PCI-e slot (3.0, 4.0, 5.0) does your current motherboard have?
    To answer this question, you will need to reference the motherboard manual or specifications online. If you have a problem finding this information, just contact the motherboard manufacturer.
  • What PCI-e version is the graphics card you are looking at getting?
    Again, to answer this question, reference the graphic card manual or specifications online. If you have trouble finding this information, just contact the graphics card manufacturer. If the PCI-e slot on your motherboard is version 3 and the graphics card you are looking at getting is version 4, you will have a problem.

Power connection(s)

  • Does the graphics card you are looking at getting require a separate PCI-e power connector(s)? If so, are they 6 or 8-pin PCI-e or 12+4 PCI-e 5.0 connector(s), and how many does it need?
    You should be able to find this information on the vendor or manufacturer's website. The information should also be on the outside of the box.
  • Does your current power supply have all of the proper PCI-e connector(s) for it?
    Some lower-wattage power supplies have only 6-pin PCI-e connectors. Visually check your existing power supply for the type and quantity of PCI-e power connectors.

Related articles
Tips for choosing the right graphics card for your custom-built computer

Things to consider when replacing or upgrading your memory

Slot type and speed

  • What slot type and memory speed does your existing motherboard support (DDR3 2400, DDR4 4200, DDR5 6400, etc.)?
    To answer this question, you will need to reference the motherboard manual or specifications online. If you have a problem finding this information, just contact the motherboard manufacturer.

Existing memory compatibly

  • Are you going to add more memory to your current memory?
    The one thing you want to try and avoid when adding memory is incompatibility with existing memory. If you plan on adding a couple more memory modules, try to use your current memory's exact make and model. Even though memory from different manufacturers may be the same slot and speed type, their clock timings can differ. So, using the same make and model of memory in all slots is always recommended. If you can't, make sure you match the memory timing of your existing memory.

Related articles
How to upgrade or add more memory to your computer

Things to consider when replacing or upgrading your drive

Form factor and size

  • What size and form factor drive(s) are you looking at getting?
    If you are replacing an existing drive, you should go with one that is the same form factor (3.5", 2.5", M.2, or U.2) and the same size (GB's, TB's) or larger than your existing drive. If you are upgrading your drive to a different form factor (SSD, HDD, or U.2), you need to make sure your current case has a place to mount the other kind of drive (3.5" or 2.5"). If you are upgrading your drive to a different form factor (M.2, mSATA), you need to make sure your existing motherboard has the correct form factor (M.2 2242, M.2 2260, M.2 2280), key notches (B key, M key or both) and interface (SATA 3, PCI-e 3 or NVMe) as the drive you are looking at getting. If you want an M.2 or mSATA and your motherboard does not have the appropriate slot, you will need to use an expansion card.

Related articles
How to upgrade the drive in your computer

Things to consider when replacing or upgrading your case

Motherboard Form Factor (micro-ATX, ATX, ITX, etc.)

  • What is the form factor of your existing case?
    If the case you are looking at getting is designed for a mini-ATX motherboard, you will not get a standard ATX motherboard to fit in it. Check the case manufacturer's website to verify the motherboard form factors that will fit in it.

CPU fan

  • Does the case you are looking at getting have enough space for your existing CPU fan?
    There is nothing worse than getting the motherboard, CPU, and cooler installed in a new case only to find out that you cannot get the side of the case on. Double-check all dimensions.

Peripheral/expansion

  • Does it have enough front panel connectors for the onboard headers of the motherboard?
    It sucks having USB 3.0 header(s) on the motherboard and not having any or enough connectors on the front of the case.
  • If you have a DVD or BD drive, does it have a 5.25" drive bay in front for it?
    Many cases nowadays do not have 5.25" drive bays. If you have a 5.25" drive or drives (CD, DVD, BD), you will need to double-check the case you are looking at getting.

Related articles
Tips for choosing the perfect case for your computer

Free computer diagnostics

Repairing a PC can sometimes be expensive, and that is why we offer free basic in-shop diagnostics. Give one of our professional and experienced technicians a call at (602) 795-1111, and let's see what we can do for you.

Check out our reviews

Geeks In Phoenix LLC, BBB Business Review

Customer service is #1

Here at Geeks in Phoenix, we take pride in providing excellent customer service. We aim to give the highest quality of service  from computer repair, virus removal, and data recovery.

Bring your computer to us and save

Repairing a computer can be time-consuming. That is why we base our in-shop service on the time we work on your computer, not the time it takes for your computer to work! From running memory checking software to scanning for viruses, these are processes that can take some time.

Contact us

If you have any questions, please feel free to give us a call at (602) 795-1111  and talk with one of our Geeks. Or you can send us a message from our contact page , and one of our Geeks will get back to you as soon as possible. Or you can stop by and see us. Here are our hours and location.

Like Geeks in Phoenix on Facebook

Follow Geeks in Phoenix on Twitter

Watch Geeks in Phoenix on YouTube