4722 E Monte Vista Rd, Phoenix, AZ 85008 | Mon–Fri 8am–5pm

What to do when Automatic Repair couldn't repair your PC

If your computer shows the message "Automatic Repair couldn't repair your PC," Windows tried to fix a startup problem on its own and failed. This usually happens after a bad update, a sudden shutdown, a corrupted system file, or a hard drive error. The good news is that you can try several things before assuming the worst. The steps below are arranged from least to most drastic, so work through them in order.

What to do when Automatic Repair couldn't repair your PC

Note: For your convenience, all links in this post open in a new tab.

The first thing to do is get to Advanced Options

When you see the Automatic Repair screen, left-click Advanced options. This opens the Windows Recovery Environment (WinRE), where all the repair tools live. Every step in this article starts from that screen.

From Advanced options, left-click Troubleshoot to see the full set of recovery tools.

Using Windows 11 installation media: If the Automatic Repair screen doesn't appear, or if WinRE won't load, you can access the same repair tools by booting from a Windows 11 installation USB drive. When the setup screen appears, left-click Next, then left-click Repair your computer in the lower-left corner. This opens Advanced options, and all of the steps below apply from that point forward. If you do not have installation media, Microsoft offers a free tool called the Media Creation Tool on its website that lets you create a bootable USB drive from another computer.
BitLocker recovery key: Windows 11 enables BitLocker drive encryption by default, including the Home edition. When you first set up your computer and signed in with a Microsoft account, Windows automatically uploaded the recovery key to your account. Some repair options, including Command Prompt and Reset this PC, will prompt you for this 48-digit key before proceeding. To find it, sign in to account.microsoft.com on another device (your cell phone works great for this) and look under Devices. If your workplace or school manages your computer, check with your IT department. If you set up your computer with a local account instead of a Microsoft account, BitLocker encryption may not have finished, and you may not be able to access all recovery tools.

Step 1: Restart your PC

I know it sounds too simple, but it works most of the time. A single bad startup cycle can trigger the Automatic Repair loop, and a clean restart clears it.

On the Automatic Repair screen, left-click Restart. If it boots normally, you're done. If it loops back to the same screen, move on to the next step.

Step 2: Run Startup Repair

Startup Repair is Windows' own tool for fixing common boot problems. It's worth trying before anything else in the Advanced options menu.

  1. From Advanced options, left-click Troubleshoot.
  2. Left-click Advanced options.
  3. Left-click Startup Repair.
  4. Select your user account and enter your password if prompted.
  5. Let the process run. Your computer will restart when it finishes.

Step 3: Use System Restore

If your computer was working before a recent update or software installation, System Restore can roll it back to a working point. This does not affect your personal files, but it will undo recently installed programs and drivers. For a full explanation of how System Restore and restore points work, see our post: How to use System Protection and Restore Points in Windows 11.

  1. From Advanced options, left-click Troubleshoot.
  2. Left-click Advanced options.
  3. Left-click System Restore.
  4. Select your user account and enter your password if prompted.
  5. Choose a restore point from before the problem started and follow the prompts.

If no restore points are listed, System Restore was either disabled or no snapshots exist. Time to proceed to the next step.

Step 4: Uninstall recent updates

If the problem started right after a Windows Update, you may be able to remove it from the recovery environment. If you can get back into Windows, our post How to uninstall a Windows 11 update that is causing problems also covers the process from inside the operating system.

  1. From Advanced options, left-click Troubleshoot.
  2. Left-click Advanced options.
  3. Left-click Uninstall Updates.
  4. Choose Uninstall latest quality update first. If that doesn't resolve the issue, repeat the process and choose Uninstall latest feature update.

Step 5: Run Command Prompt fixes

The Command Prompt in WinRE gives you access to tools that can repair the most common causes of startup failure: disk errors and corrupted boot records.

  1. From Advanced options, left-click Troubleshoot.
  2. Left-click Advanced options.
  3. Left-click Command Prompt.
  4. Select your user account and enter your password if prompted.

Check the disk for errors:

Type the following command and press Enter. Replace C: with the letter of your Windows drive if it is different.

chkdsk C: /f /r

This scans the drive for file system errors and bad sectors and attempts to repair them. It may take a while to complete.

Repair the boot records:

If chkdsk doesn't resolve the issue, these three commands fix the most common boot record problems. Type each one and press Enter after each:

bootrec /fixmbr
bootrec /fixboot
bootrec /rebuildbcd

After running these commands, type exit and press Enter, then restart your computer.

Step 6: Reset this PC

If none of the above options work, Reset this PC reinstalls Windows while giving you the option to keep your personal files. This is a significant step, but it is less drastic than a full reinstall from scratch. Before proceeding, see our post on 3 crucial steps to remember before reinstalling Windows 11 for what to check and prepare first.

  1. From Advanced options, left-click Troubleshoot.
  2. Left-click Reset this PC.
  3. Choose Keep my files to preserve your documents, photos, and other personal data. Note that installed programs will be removed.
  4. Follow the on-screen prompts to complete the reset.

When none of this works

If you've tried every step above and the computer still will not start, the problem may be hardware rather than software. A failing hard drive or SSD can cause the Automatic Repair loop and prevent any software-based fix from sticking. Signs the drive may be failing include loud clicking from inside the computer, very slow performance before the crash, or chkdsk reporting a large number of bad sectors.

At that point, the priority shifts to recovering your data before the drive fails. A local computer repair shop can often pull data off a failing drive and transfer it to a new one. If you are in the Phoenix area, we offer data recovery services and can help you recover your files safely.

The "Automatic Repair couldn't repair your PC" message is alarming, but it doesn't always mean serious trouble. A restart or Startup Repair resolves it in many cases. If you need to go further, follow the steps in order: System Restore, uninstalling updates, Command Prompt fixes, and finally Reset this PC. If none of those work, the issue is likely hardware, and it's worth bringing the computer in before the situation gets worse.

Add comment

Need Help Now?

Free basic in-shop diagnostics on all repair services. Same-day service on most repairs.

Call (602) 795-1111 Send a Message

4722 East Monte Vista Rd
Phoenix, AZ 85008

Mon–Fri, 8am–5pm

Free Basic In-Shop Diagnostics BBB Accredited Same-Day Service

Ready to Get Your Computer Fixed?

Free basic in-shop diagnostics. Honest pricing. Same-day service on most repairs.

4722 East Monte Vista Rd, Phoenix, AZ 85008  ·  Mon–Fri 8am–5pm