Geeks in Phoenix

Geek Blog


Upgrading to Windows 7 from Windows XP

Windows XP is currently the most popular operating system, with Windows 7 quickly catching up. As more and more people are moving from Windows XP to Windows 7, I thought I would spotlight a series of articles that I wrote a little while back. My move from Windows XP to Windows 7 was a 'side-by-side' migration, with two separate systems.

I, believe it or not, never used Windows Vista on any of my production systems. I ran Windows XP up until Windows 7 was released. I did run Windows 7 Release Candidates on a test system for several months before its release and was very happy with it. I even wrote a series of articles about it too. Here they all are.

Upgrading to Windows 7 from Windows XP

Upgrading from Windows XP to Windows 7 (Part 1)

Upgrading from Windows XP to Windows 7 (Part 2 - Drive Imaging)

Upgrading from Windows XP to Windows 7 (Part 3 - Hardware / Software Inventory)

Upgrading from Windows XP to Windows 7 (Part 4 - Windows 7 Installation)

Upgrading from Windows XP to Windows 7 (Part 5 - Applications and Settings)

Upgrading from Windows XP to Windows 7 (Part 6 - Epilogue)

Beta testing Windows 7

Beta testing Windows 7 - Part 1

Beta testing Windows 7 - Part 2

Beta testing Windows 7 - Part 3

Beta testing Windows 7 - Part 4 (Antec cases)

Beta testing Windows 7 - Part 5 (BIOS and installation)

Beta testing Windows 7 - Part 6 (software overview) (Video)

Beta testing Windows 7 - Part 7 (Photoshop Benchmark)

My latest e-Holster (2010)

It was about a decade ago when I saw an ad for the e-holster. At the time, I was stuffing my pockets with a PDA, cell phone, keys, etc. and needed a better way of carrying all of these gadgets. The e-holster was just right.

I got my first one in 2001 and have worn one ever since. I have had to buy new modules over the years to accommodate the different gadgets. Over the past year, I have replaced all of the components.

e-Holster front
Front of e-Holster

e-Holster inside
Inside of e-Holster

The leather shoulder holster had started to show its age, so I went with the nylon version. It also has loops for wired headsets, where the leather one did not. And the Android phone and new eyeglass case size required the purchase of new case modules (leather).

Resetting your network adapter in Windows 7

Network shell (Netsh) is a tool an administrator can use to configure and monitor network devices on Windows based computers at a command prompt. A common use of Netsh, is to reset the TCP/IP stack back to default settings.

But not only will Netsh reset the TCP/IP stack, but it can also completely reset your network adapter(s). It will reset the Windows Firewall in Windows 7 too.

Using Netsh in Windows 7

To use Netsh, you will need to open a Command Prompt as an administrator. There are two ways to do this:

  • Click the Start button, then All Programs, then Accessories, then right-click Command Prompt, and then click Run as administrator. If you're prompted for an administrator password or confirmation, type the password or provide confirmation.
  • or

  • Click the Start button. In the search box, type Command Prompt, and then, in the list of results, right-click Command Prompt, and then click Run as administrator. If you're prompted for an administrator password or confirmation, type the password or provide confirmation.

Netsh commands in Windows 7

The following is a list of the Netsh commands you can use to reset your Windows 7 network adapter:

Restores the Windows Firewall with Advanced Security policy to the default policy. The current active policy can be optionally exported to a specified file. This command returns all settings to not configured and deletes all connection security and firewall rules in a Group Policy object.netsh advfirewall reset

Resets the BranchCache service. Flushes the local cache. Every configuration parameter of BranchCache will be reset to its default value.netsh branchcache reset

Resets TCP/IP and related components to a clean state.netsh int ip reset c:\resetlog.txt

Resets IPv6 configuration state.netsh int ipv6 reset

Resets Winsock Catalog to a clean state. All Winsock Layered Service Providers which were previously installed must be reinstalled. This command does not affect Winsock Name Space Provider entries.netsh winsock reset

Resetting your network adapter in Windows Vista

Network shell (Netsh) is a tool an administrator can use to configure and monitor network devices on Windows based computers at a command prompt. A common use of Netsh, is to reset the TCP/IP stack back to default settings.

But not only will Netsh reset the TCP/IP stack, but it can also completely reset your network adapter(s). It will also reset the Windows Firewall in Windows Vista.

Using Netsh in Windows Vista

To use Netsh, you will need to open a Command Prompt as an administrator. There are two ways to do this:

  • Click the Start button, then All Programs, then Accessories, then right-click Command Prompt, and then click Run as administrator. If you're prompted for an administrator password or confirmation, type the password or provide confirmation.
  • or

  • Click the Start button. In the search box, type Command Prompt, and then, in the list of results, right-click Command Prompt, and then click Run as administrator. If you're prompted for an administrator password or confirmation, type the password or provide confirmation.

Netsh commands in Windows Vista

The following is a list of the Netsh commands you can use to reset your Windows Vista network adapter:

Resets interface informationnetsh int reset all

Resets TCP/IP and related components to a clean state.netsh int ip reset c:\resetlog.txt

Resets IPv6 configuration state.netsh int ipv6 reset

Resets firewall configuration to default. Restoring the default settings will delete all Windows Firewall settings that you have changed. For example, if you have allowed certain programs through the firewall, those programs will be blocked again.netsh firewall reset

Resets Winsock Catalog to a clean state. All Winsock Layered Service Providers which were previously installed must be reinstalled. This command does not affect Winsock Name Space Provider entries.netsh winsock reset

Resetting your network adapter in Windows XP

Network shell (Netsh) is a tool an administrator can use to configure and monitor network devices on Windows based computers at a command prompt. A common use of Netsh is to reset the TCP/IP stack back to default settings.

But not only will Netsh reset the TCP/IP stack, but it can also completely reset your network adapter(s). It will also display the network diagnostics page in Windows XP.

Using Netsh in Windows XP

To use Netsh, you will need to open a Command Prompt. There are two ways to do this:

  • Click the Start button, then All Programs, then Accessories, then click on Command Prompt
  • or

  • Press Windows logo key + R. This will bring up the Run dialog box. Type CMD and press OK

Netsh commands in Windows XP

The following is a list of the Netsh commands you can use to reset your Windows XP network adapter:

Resets network interface informationnetsh int reset all

Resets TCP/IP and related components to a clean state.netsh int ip reset c:\resetlog.txt

Resets IPv6 configuration state.netsh int ipv6 reset

Displays the web page user interface.netsh diag gui

Resets Winsock Catalog to a clean state. All Winsock Layered Service Providers which were previously installed must be reinstalled. This command does not affect Winsock Name Space Provider entries.netsh winsock reset

Free computer diagnostics

Repairing a PC can sometimes be expensive, and that is why we offer free basic in-shop diagnostics. Give one of our professional and experienced technicians a call at (602) 795-1111, and let's see what we can do for you.

Check out our reviews

Geeks In Phoenix LLC, BBB Business Review

Customer service is #1

Here at Geeks in Phoenix, we take pride in providing excellent customer service. We aim to give the highest quality of service  from computer repair, virus removal, and data recovery.

Bring your computer to us and save

Repairing a computer can be time-consuming. That is why we base our in-shop service on the time we work on your computer, not the time it takes for your computer to work! From running memory checking software to scanning for viruses, these are processes that can take some time.

Contact us

If you have any questions, please feel free to give us a call at (602) 795-1111  and talk with one of our Geeks. Or you can send us a message from our contact page contact page , and one of our Geeks will get back to you as soon as possible. Or you can stop by and see us. Here are our hours and location.

Like Geeks in Phoenix on Facebook

Follow Geeks in Phoenix on Twitter

Watch Geeks in Phoenix on YouTube