Geeks in Phoenix

Geek Blog


How to backup your Windows 11 computer using Windows Backup and File History

Did you know that Windows 11 includes two (2) programs for backing up your computer? And when used together, they can provide excellent backup protection. Here is how to use Windows Backup and File History to back up your Windows 11 computer.

How to backup your Windows 11 computer using Windows Backup and File History

Backing up your computer has never been glamorous, and most people tend just to put it off. But without a good backup plan, you could be heading for a huge problem. Windows 11 includes two (2) programs to help you back up your system; Windows Backup and File History. Each of them performs a specific type of backup and use different methods of backing your computer. But when used together, they can be a pretty robust backup plan.

Now Windows Backup has been around since Windows 7. In fact, the name of the shortcut is Backup and Restore (Windows 7). File History has been around since Windows 8. They work differently but complement each other in backing up your computer and data.

By default, Windows Backup and File History like to back up to external or network drives. In fact, using a drive inside your computer is not recommended because if you have any problems with your computer, you may not be able to access any of the data. But you can use the same external or network drive for both programs if you like.

Now a typical backup scenario would use Windows Backup for complete system (bare metal) backup once a week and File History set to back up personal files every hour. Bare metal refers to restoring your computer to a new drive using a Recovery Drive and a Windows Backup image.

If you frequently make software changes (installing, uninstalling, updates, etc.) to your computer, you may want to have Windows Backup run more often. Remember that Windows Backup typically includes all your personal files (Desktop, Documents, Downloads, Music, Pictures, and Videos).

Windows 11 File History

Windows 11 File History main screen

File History creates time-stamped versions of your personal files; Libraries (Camera Roll, Documents, Music, Pictures, Saved Pictures, and Videos), Desktop, Contacts, and Favorites. It saves your files on a regular schedule, from 10 minutes to daily (every hour is the default), adding the date and time to the file name.

File History saves backup file versions from 1 month to forever or until space is needed (forever is the default). It does not use any compression or encryption when saving files, so you can easily navigate through them and preview or open any that you want to view. You also access the backup files from another computer, and no special software is required.

Now you can exclude folders from being backup by File History, but you cannot add folders. The only way to add folders to the list of items to be backed up is by creating a new library, But for most Windows 11 users, the default libraries are more than enough.

Windows 11 Windows Backup

Windows 11 Windows Backup main screen

Windows Backup creates an encrypted and compressed backup image of your computer that can only be accessed through Windows Backup or a Recovery Drive. Windows Backup can restore individual folders and files, and a Recovery Drive can restore a complete drive image.

You can set up Windows Backup to run on a set schedule, or you can run it on demand. Windows Backup, by default, is set to perform incremental backups, which means that every time you run it, it backs up only files that have changed since the last backup.

You can customize which files and folders it backs up, but I recommend using the Let Windows choose (system image) option. I have restored numerous failed drives using a Recovery Drive and a system image, and it works great and can be a lifesaver.

How to access and configure Windows Backup and File History

The Control Panel is the only way to get to Windows Backup or File History. There are several ways to get to the Control Panel inside of Windows 11, so here is an article on all the different ways to get there. The following is the most straightforward way of doing it.

  1. Left-click on the Start Windows logo key button to bring up the Start menu.
  2. In the upper right-hand corner of the Start menu, left-click on All apps.
  3. Scroll down the list of programs and left-click on Windows Tools.
  4. Left-click on Control Panel.
  5. If viewing the Control Panel by Category, left-click on either Save backup copies of your files with File History or Backup and Restore (Windows 7) under System and Security. If viewing by Large/Small Icons, left-click on either Backup and Restore (Windows 7) or File History.

How to configure File History

Once File History is open, you will find four (4) options in the left-hand column; Restore personal files, Select drive, Exclude folders, and Advanced settings. You first need to select the drive you want to use for backing up files. Remember, you can only use external or network drives, so make sure you can access that drive before you start to set up File History.

Once you select your backup drive, you can omit any of your personal folders (Exclude folders) you do not want to backup (Camera Roll, Documents, Music, Pictures, Saved Pictures, and Videos). You can also change how often your files get backup and how long to keep saved versions (Advanced settings).

How to configure Windows Backup

Once you have Windows Backup (Backup and Restore (Windows 7)) open, select the Set up backup link in the right column.
Windows 11 Windows Backup starting screen
This will start Windows Backup, and you will be prompted as to where you want to save your backup.

After selecting where to save your backup, you will be prompted for what to backup.
Choose what to backup screen
You will get two (2) choices; Let Windows choose (recommended) or Let me choose. I highly recommend the Let Windows choose option, as it will create a system image that can be used for bare metal recovery.

Once you have selected what to backup, you will be prompted to review your backup settings.
Review your Windows Backup settings
Next, you will need to set up a backup schedule. Quite often, the default once a week on Sunday at 7:00 PM will work but can be changed to fit your schedule.

After you set the schedule, left-click on the Save settings and run backup button, and Windows Backup will perform the first backup. Remember that you need to be connected to the drive you have chosen for Windows Backup to use before the scheduled time.

How to backup and restore the registry in Windows 10 and Windows 11

Updated January 30, 2024

Everyone knows that when you make any significant change to your computer, you must backup the registry first. But not many casual computer users understand what the registry is and how to back it up. So here's how to backup and restore the registry in Windows 10 and Windows 11.

How to backup and restore the registry in Windows 10

So, what is the registry? The registry is a database that contains information on the hardware, software, and user(s) installed on your computer. Even though it may sound like a single entity, it consists of several different files. The collection of these files is called the registry hive.

FYI: The information in the registry hive is stored in two (2) essential elements: Keys and Values. Keys are like folders; they can contain values and keys. Values are like files; they contain data in various formats.

Automatically backup and restore the registry in Windows 10 and Windows 11

The System Protection tab of the System Properties dialog box inside of Windows 10
The System Protection tab of the System Properties dialog box inside Windows 10

Now, the simplest way to backup the registry is to create a restore point. Restore points contain backup copies of the registry, most drivers, and files with particular extensions.

Restore points can be a lifesaver if your system fails to start after a change or modification. Just make sure to create a system repair disk or recovery drive (instructions below) and have it on hand only in case your system won't start up correctly. You can use it to boot your computer and access a restore point.

How to create a restore point in Windows 10 and Windows 11

  1. Bring up the System > About page by either:
    • Pressing the Windows logo key Windows logo key + Pause.
    • Pressing the Windows logo key Windows logo key + X to bring up the Power User menu and press Y to select System.
    • Right-clicking on the Windows logo Windows logo key on the Start menu to bring up the Power User menu and select System.
  2. In the right-hand column, left-click on the System protection link.
  3. In the Protection Settings field, check and ensure system protection is enabled. If it is not, then highlight the drive's name and left-click on the Configure ... button. Once you have verified that system protection is enabled, proceed to the next step.
  4. Highlight the C: (System) drive, and left-click on the button labeled Create ....
  5. Type in a descriptive title for your restore point (the date and time are automatically added).
  6. Left-click on Create.

How to use a restore point in Windows 10 and Windows 11

  1. Bring up the System > About page by either:
    • Pressing the Windows logo key Windows logo key + Pause.
    • Pressing the Windows logo key Windows logo key + X to bring up the Power User menu and press Y to select System.
    • Right-clicking on the Windows logo Windows logo key on the Start menu to bring up the Power User menu and select System.
  2. In the right-hand column, left-click on the System protection link.
  3. At the top of the System Protection tab, left-click on the button under the System Restore section labeled System Restore ....
  4. When the starting screen appears, left-click on Next >.
  5. Highlight the restore point you want to use, then left-click on Next >.
  6. When the confirmation screen appears, left-click on Finish.
  7. A warning should appear telling you not to interrupt the system restore process. Left-click on Yes to proceed.
  8. Your computer will start restoring the system (including the registry) to how it was when the restore point was created and reboot.

Creating a system repair disk or recovery drive in Windows 10 and Windows 11

System repair disks and recovery drives are essentially the same thing. They are bootable drives that contain the essential system tools to repair your Windows installation. The only difference is the media they use; system repair disks use CDs/DVDs, and recovery drives use USBs. Recovery drives can also reinstall Windows. Click here for more on Recovery Drives for Windows 10 and Windows 11.

How to create a system repair disk for Windows 10 or Windows 11 (requires a blank CD/DVD)

  1. Bring up the Run dialog box by either:
    • Pressing the Windows logo key Windows logo key + R
    • Right-click on the Windows logo Windows logo key on the Start Menu or press the Windows logo key Windows logo key + X and then select Run
  2. In the Run dialog box that appears, type recdisc and select OK. If you're prompted for an administrator password or confirmation, type the password or provide confirmation. Just follow the prompts.

How to create a recovery drive for Windows 10 (requires an empty USB drive 16GB or larger)

  1. Left-click on the Start button Windows logo to bring up the Start menu.
  2. Scroll down the list of programs and left-click on Windows Accessories.
  3. Double left-click on Recovery Drive. Just follow the prompts.

How to create a recovery drive for Windows 11 (requires an empty USB drive 16GB or larger)

  1. Left-click on the Start button Windows logo to bring up the Start menu.
  2. In the upper right-hand corner of the Start menu, left-click on All apps.
  3. Scroll down the list of programs and left-click on Windows Tools.
  4. Double left-click on Recovery Drive. Just follow the prompts.

Manually backup and restore the registry in Windows 10 and Windows 11

The Registry Editor interface inside of Windows 10
The Registry Editor interface inside of Windows 10

Another way to backup the registry is to use the built-in Registry Editor. The beautiful thing about using the Registry Editor is that you don't have to backup the whole registry if you don't want to. You can just backup any key or value you want.

There is a downside to using the Registry Editor to manually backup the registry. To restore anything with the Registry Editor, you must boot your computer in either standard or safe mode. A system repair disc doesn't have the Registry Editor included.

How to manually backup the registry using the Registry Editor in Windows 10 and Windows 11

  1. Bring up the Run dialog box by either:
    • Pressing the Windows logo key Windows logo key + R
    • Right-click on the Windows logo Windows logo key on the Start Menu or press the Windows logo key Windows logo key + X and then select Run
  2. In the Run dialog box that appears, type regedit and select OK. If you're prompted for an administrator password or confirmation, type the password or provide confirmation.
  3. When the Registry Editor appears either:
    • Highlight Computer in the left-hand column to backup the complete registry.
    • Highlight the key or value you want to backup.
  4. Left-click on the File pull-down menu and left-click on Export.
  5. Select the location and a descriptive file name for the backup file, and then left-click on Save.

How to manually restore the registry using the Registry Editor in Windows 10 and Windows 11

  1. Bring up the Run dialog box by either:
    • Pressing the Windows logo key Windows logo key + R
    • Right-click on the Windows logo Windows logo key on the Start Menu or press the Windows logo key Windows logo key + X and then select Run
  2. In the Run dialog box that appears, type regedit and select OK. If you're prompted for an administrator password or confirmation, type the password or provide confirmation.
  3. When the Registry Editor appears either:
  4. Left-click on the File pull-down menu and left-click on Import.
  5. Navigate to the location of the REG file you want to import and left-click on it.
  6. Left-click on the Open button. You should get a confirmation screen telling you successfully imported the file.

Back up your files in Windows 8 with File History

File History in Windows 8 automatically backs up files in your libraries, contacts, favorites, Microsoft OneDrive, and your desktop. If the originals are lost, damaged, or deleted, you can restore all of them. You can also find different versions of your files from a specific point in time. Over time, you'll have a complete history of your files. File History is the replacement for Backup and Restore from previous versions of Windows.

How to use File History in Windows 8

  1. Go to the Start menu.
  2. Right-click the Start menu background to bring up the app commands.
  3. Select 'All apps'.
  4. Scroll to the 'Control Panel' tile and left-click on it.
  5. Under 'System and Security', left-click on 'Save backup copies of your files with File History'.

Or

  1. Go to the Start menu.
  2. Right-click the Start menu background to bring up the app commands.
  3. Select 'All apps'.
  4. Scroll to the 'Control Panel' tile and left-click on it.
  5. On the upper right side of the Control Panel, there is a 'View by:' pull-down menu (the default is Category). Left-click on the arrow to the right and select either 'Large icons' or 'Small icons'.
  6. Left-click on 'File History'.

Before you start using File History to back up your files, you'll need to set up a drive to save files to. It is recommended that you use an external drive or network location to help protect your files against a crash or other PC problem. File History only saves copies of files in your libraries, contacts, favorites, Microsoft OneDrive, and your desktop. If you have files or folders elsewhere that you want to be backed up, you can add them to one of your existing libraries or create a new library. You also change the frequency of the File History back up by clicking on Advanced settings on the left-hand side of the window.

How to restore a file using File History in Windows 8

  1. Go to the Start menu.
  2. Right-click the Start menu background to bring up the app commands.
  3. Select 'All apps'.
  4. Scroll to the 'Control Panel' tile and left-click on it.
  5. On the upper right side of the Control Panel, there is a 'View by:' pull-down menu (the default is Category). Left-click on the arrow to the right and select either 'Large icons' or 'Small icons'.
  6. Left-click on 'File History'.
  7. On the left-hand side of the File History window, left-click on 'Restore personal files'. Scroll side to side and select the date/time and the files you wish to restore.
  8. Click on the circular arrow at the bottom of the screen to restore the selected folder(s) and file(s) to their original location(s).

Free computer diagnostics

Repairing a PC can sometimes be expensive, and that is why we offer free basic in-shop diagnostics. Give one of our professional and experienced technicians a call at (602) 795-1111, and let's see what we can do for you.

Check out our reviews

Geeks In Phoenix LLC, BBB Business Review

Customer service is #1

Here at Geeks in Phoenix, we take pride in providing excellent customer service. We aim to give the highest quality of service  from computer repair, virus removal, and data recovery.

Bring your computer to us and save

Repairing a computer can be time-consuming. That is why we base our in-shop service on the time we work on your computer, not the time it takes for your computer to work! From running memory checking software to scanning for viruses, these are processes that can take some time.

Contact us

If you have any questions, please feel free to give us a call at (602) 795-1111  and talk with one of our Geeks. Or you can send us a message from our contact page , and one of our Geeks will get back to you as soon as possible. Or you can stop by and see us. Here are our hours and location.

Like Geeks in Phoenix on Facebook

Follow Geeks in Phoenix on Twitter

Watch Geeks in Phoenix on YouTube