Geeks in Phoenix

Geek Blog


Check your hard drive for errors in Windows 8

Keeping your hard drive free from errors is essential to the performance of your Windows 8 computer. When it comes to computer repair, this is one of the first things I do. So, if your experiencing problems opening an application or file, it may be time to check your hard drive for errors with Windows 8 built-in disk checking utility, CHKDSK (checkdisk).

There are two ways to run CHKDSK, standard and advanced. Here are the procedures for both.

Standard hard drive error checking in Windows 8

  1. Go to the Start menu.
  2. Right click the Start menu background to bring up the app commands.
  3. Select 'All apps'.
  4. Scroll to the 'File Explorer' tile and left click on it.
  5. Left click on 'Computer'.
  6. Right-click the hard drive that you want to check, and then click 'Properties'.
  7. Click the 'Tools' tab, and then, under 'Error-checking', click 'Check Now'. If you are prompted for an administrator password or confirmation, type the password or provide confirmation.
  8. Select 'Scan drive'.

Advanced hard drive error checking in Windows 8

  1. Open a Command Prompt with Administrative privileges (click here for instructions)
  2. Use the following command line syntax(s) and parameter(s) to run CHKDSK:

CHKDSK [volume[[path]filename]]] [/F] [/V] [/R] [/X] [/I] [/C] [/L[:size]] [/B] [/scan] [/spotfix]

volume Specifies the drive letter (followed by a colon), mount point, or volume name.
filename FAT/FAT32 only: Specifies the files to check for fragmentation.
/F Fixes errors on the disk.
/V On FAT/FAT32: Displays the full path and name of every file on the disk. On NTFS: Displays cleanup messages if any.
/R Locates bad sectors and recovers readable information (implies /F, when /scan not specified).
/L:size NTFS only: Changes the log file size to the specified number of kilobytes. If size is not specified, displays current size.
/X Forces the volume to dismount first if necessary. All opened handles to the volume would then be invalid (implies /F).
/I NTFS only: Performs a less vigorous check of index entries.
/C NTFS only: Skips checking of cycles within the folder structure.
/B NTFS only: Re-evaluates bad clusters on the volume (implies /R)
/scan NTFS only: Runs a online scan on the volume
/forceofflinefix NTFS only: (Must be used with "/scan") Bypass all online repair; all defects found are queued for offline repair (i.e. "chkdsk /spotfix").
/perf NTFS only: (Must be used with "/scan") Uses more system resources to complete a scan as fast as possible. This may have a negative performance impact on other tasks running on the system.
/spotfix NTFS only: Runs spot fixing on the volume
/sdcleanup NTFS only: Garbage collect unneeded security descriptor data (implies /F).
/offlinescanandfix Runs an offline scan and fix on the volume.

The /I or /C switch reduces the amount of time required to run CHKDSK by skipping certain checks of the volume.

My five favorite Windows tips for maintaining your computer

In this article, I am going to share my five favorite tips for maintaining Microsoft Windows.

  1. Checkdisk. This is the first thing I do when I get a system here in the shop. Errors do occur and files do get damaged. Best to take care of this first thing. And yes, this can take a while, so I always recommend leaving your system on and let Checkdisk run over night. That way your computer is ready to go first thing in the morning.

    For more information on how to perform a Checkdisk, just select your operating system below:
    Windows 7 Checkdisk
    Windows Vista Checkdisk
    Windows XP Checkdisk

  2. Delete Temporary files. This is the first place to look when you need to free up some hard disk space. These files served their propose at one time, but for some unknown reason, the program that used them did not delete them. When deleting temporary files, some may be still in use. I recommend deleting all files / folders that are over a week old. See below for the location of temporary files folder on your version of Windows:

    Windows 7 / Vista - C:\Users\username\AppData\Local\Temp
    Windows XP - C:\Documents and Settings\username\Local Settings\Temp

  3. Delete the Internet Explorer cache. This is the second place to look when you need to free up some hard disk space. I have seen systems with over 9 Gb of temporary files. Open Internet Explorer and go to Tools > Internet Options and change the following settings:

    Internet Explorer Temporary Files
    Internet Explorer Temporary Files

  4. Pagefile optimization. This one often gets over looked. There is a formula for calculating the correct pagefile size. Minimum pagefile size is one and a half (1.5) x amount of memory. Maximum pagefile size is three (3) x minimum pagefile size. Say you have 4 Gb (4,096 Mb) of memory. 1.5 x 4,096 = 6,144 Mb would be the min. pagefile size and 3 x 6,144 = 18,432 Mb would be the max. pagefile size.

    Windows Pagefile Settings

    To change the pagefile size, you need to access the System Properties dialog box. Press Windows logo key + Pause (Windows 7 / Vista users select 'Advanced' system settings). Then select the 'Advanced' tab and under 'Performance' click on Settings. Then select the 'Advanced' tab and under 'Virtual memory' click on Change.

    For more information on how to change the pagefile size, just select your operating system below:
    Windows 7 Pagefile Settings
    Windows Vista Pagefile Settings
    Windows XP Pagefile Settings

  5. Disk Defragmenter. Probably the best single thing you can do to speed up your computer. Imagine a filing cabinet where all of the folders were out of order and files were misplaced through out the cabinet. How could you find anything? Same thing with your hard drive. Disk Defragmenter takes care of that for you. And you can run it as a scheduled task too.

    For more information on how to use Disk Defragmenter, just select your operating system below:
    Windows 7 Disk Defragmenter
    Windows Vista Disk Defragmenter
    Windows XP Disk Defragmenter

Give these five tips a try and see how much more performance you can get from your computer,
Scott

Check your hard disk for errors in Windows 7

You can help solve some computer problems and improve the performance of your computer by making sure that your hard disk has no errors.

Click on the Start button.

Click on Computer.

Right-click the hard disk drive that you want to check, and then click Properties.

Click the Tools tab, and then, under Error-checking, click Check Now. If you are prompted for an administrator password or confirmation, type the password or provide confirmation.

To automatically repair problems with files and folders that the scan detects, select Automatically fix file system errors. Otherwise, the disk check will simply report problems but not fix them.

To perform a thorough disk check, select Scan for and attempt recovery of bad sectors. This scan attempts to find and repair physical errors on the hard disk itself, and it can take much longer to complete.

To check for both file errors and physical errors, select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors.

Click Start.

Depending upon the size of your hard disk, this may take several minutes. For best results, don't use your computer for any other tasks while it's checking for errors.

Note:
If you select Automatically fix file system errors for a disk that is in use (for example, the partition that contains Windows), you'll be prompted to reschedule the disk check for the next time you restart your computer.

Check your hard disk for errors in Windows Vista

You can help solve some computer problems and improve the performance of your computer by making sure that your hard disk has no errors.

Click on the Start button.

Click on Computer.

Right-click the hard disk drive that you want to check, and then click Properties.

Click the Tools tab, and then, under Error-checking, click Check Now. If you are prompted for an administrator password or confirmation, type the password or provide confirmation.

To automatically repair problems with files and folders that the scan detects, select Automatically fix file system errors. Otherwise, the disk check will simply report problems but not fix them.

To perform a thorough disk check, select Scan for and attempt recovery of bad sectors. This scan attempts to find and repair physical errors on the hard disk itself, and it can take much longer to complete.

To check for both file errors and physical errors, select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors.

Click Start.

Depending upon the size of your hard disk, this may take several minutes. For best results, don't use your computer for any other tasks while it's checking for errors.

Note:
If you select Automatically fix file system errors for a disk that is in use (for example, the partition that contains Windows), you'll be prompted to reschedule the disk check for the next time you restart your computer.

Detecting and repairing disk errors in Windows XP

You can use the Error-checking tool to check for errors and bad sectors on your hard disk.

  • Open My Computer, and then select the local disk you want to check.
  • On the File menu, click Properties.
  • On the Tools tab, under Error-checking, click Check Now.
  • Under Check disk options, select the Scan for and attempt recovery of bad sectors check box.

Notes

  • To open My Computer, double-click the My Computer icon on the desktop.
  • All files must be closed for this process to run. If the volume is currently in use, a message box will appear prompting you to indicate whether or not you want to reschedule the disk checking for the next time you restart your system. Then, the next time you restart your system, disk checking will run. Your volume will not be available to perform other tasks while this process is running.
  • If your volume is formatted as NTFS, Windows automatically logs all file transactions, replaces bad clusters, and stores copies of key information for all files on the NTFS volume.

Customer service is #1

Here at Geeks in Phoenix, we take pride in providing excellent customer service. From computer repair, virus removal and data recovery, we aim to give the highest quality of service.

Bring your computer to us and save

Our in-shop computer repair service  is based on the time we work on your computer, not the time it takes your computer to work!

Contact us

Geeks in Phoenix
4722 East Monte Vista Road
Phoenix, Arizona 85008
(602) 795-1111

Like Geeks in Phoenix on Facebook

Follow Geeks in Phoenix on Twitter

Watch Geeks in Phoenix on YouTube

Geeks in Phoenix is an IT consulting company specializing in all aspects of Computer Repair / PC Repair / Laptop Repair. Since 2008, our expert computer repair technicians have been providing outstanding Computer Repair, Virus Removal, Data Recovery, Photo Manipulation and Website Support.

Geeks in Phoenix have the best computer repair technicians providing computer repair and service in Phoenix, Scottsdale and Tempe Arizona. We offer In-Shop, On-Site and Remote (with stable Internet connection) computer repair service.

Copyright © 2016 Geeks in Phoenix LLC